※ 非洲豬瘟恐怖超越口蹄疫!


請勿網購、攜帶肉製品入境,12月18日起初犯罰款20萬,最高可罰100萬!!!

SAS 1068E cross flash or update firmware ( hackintosh use efi driver 黑蘋果) HBA Card with raid 0 1 ?! 升級韌體 Dell 6ir

SAS 1068E cross flash or update firmware ( hackintosh use efi driver 黑蘋果) HBA Card with raid 0 1 ?! 升級韌體 Dell 6ir

分享至您喜愛的社群
  •   
  • 4
  •  
  •  
  •  
  •  
  •  
  •  
    4
    Shares

Dell 6ir這張卡已經非常古老,不過由於是PCIE介面,對於只需求HBA以及利用2TB以下硬碟做ZFS NAS的人來說,綽綽有餘,如果使用raidz3 11顆2TB,可用容量就是16TB,存取效能當然是好過一顆16TB,甚至增加了安全性,單一顆16TB是很可怕的事情,尤其是救援時。那麼如何升級韌體呢,讓娜柴帶壞你們!    SAS 1068E is very old, but good enough to be a HBA card for ZFS NAS, even use in Windows 10, Mac. This card is not only HBA, after update firmware, it can build raid 0 or 1 in HBA mode (it mode). Author: Nathan Yung

Attention:
update firmware needs 3 steps (3 files),
EFI-BSD
Load BIOS
controller firmware
every steps will ends in “Invalid Operation”, this doesn’t matter.

注意:
升級韌體有三個檔案需要處理,每個都會發生如圖,不用擔心,這不影響升級!
指令模式下也是需要下強制參數,真不用怕!
5.2_Serial_1A5E00_Load BIOS_original_update_error
***this card only support maximun 2TB disk.
***in some machine, need to shield pin 5&6, or just remove it***


1.install MegaRAID Stroage Manager


0.0_MegaRAID Storage Manager

輸入WINDOWS帳號密碼

0.1_MegaRAID Storage Manager_login

進入主畫面 Dashboard

1_MegaRAID Storage Manager_dashboard


2.choose physical
you can see four firmware numbers.
你將可以看到四個韌體的數據
NVDATA Version
BIOS Version
Firmware Package Version
Firmware Version

at the end, thses numbers will become
NVDATA Version 2D.03
BIOS Version 06.36.00.00_03.22.00.00
Firmware Package Version 01.33.00.00.06.36.00.00_03.22.00.00
Firmware Version 01.33.00.0
這就代表你成功了!
this means you did it.

2_Serial_1A5E00


3. But where to find new firmware
go to broadcom website, choose support,downloads
find “SAS3081E”

Yes, SAS 1068E=LSI SAS3081ER, chipset is the same.
別怕,我知道卡的外觀不一樣,但晶片是一樣的,抓這個就對了!

https://www.broadcom.com/support/download-search?pg=&pf=&pn=&pa=&po=&dk=sas3081e&pl=

Download two files
EFI, EFI_BSD_PH_21-3-22-00-00.zip
firmware, SAS3081ER_-Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows.zip
unzip.
then Let’s go!


4. choose update firmware
you can see it needs to update  3 files.
First, we  update [EFI-BSD]
unzip EFI_BSD_PH_21-3-22-00-00.zip will get two directories.
[efi_Pckg_DP_ALL_Devs_SCSI_rel]
[efi_Pckg_DP_IRSCSI_NONIRSAS_rel]
which one is ok, find “lsisasx64.rom”
I have tried both two file under each directory.
No Problem.

3.0_Serial_1A5E00_choose_efi_rom_before update3.1_Serial_1A5E00_choose_efi_rom3.2_Serial_1A5E00_choose_efi_rom_update_error


5. update [Load BIOS]
choose mptsas.rom
4.0_Serial_1A5E00_Load BIOS_original

5.2_Serial_1A5E00_Load BIOS_original_update_error
error again, don’t be scared, ok?

choose update again, will see new version.

5.1_Serial_1A5E00_Load BIOS_original_update_error_but ok


6.update [Controller Firmware]
current version:00.20.48.00 (mine)

3.3_Serial_1A5E00_choose_efi_rom_update_error_but ok

choose 3081ERB3.fw
why not 3081ETB3.fw?  system will show product ID is wrong, and change nothing.
so……just use 3081ERB3.fw

***becareful***
you must check chip on your card, mine is b3 version, this is printed on chip.
if yours is B2, choose B2 version.

5.1_Serial_1A5E00_controller firmware_original_choose 3081ERB3.fw_chip is b3_must choose this

贊助廣告


5.2_Serial_1A5E00_Load BIOS_original_update_error
error again, don’t be scared, ok?

choose update option agaion, version did not change?

5.0_Serial_1A5E00_controller firmware_original_choose 3081ETB3.fw_chip is b3

after reboot, it will show new version.

4.1_Serial_1A5E00_Load BIOS_original_after update


7.reboot
it shows LSILogic SAS1068E-IR
oh…..no…..I want it mode!

easy, just boot into windows,ok?
BIOS_When boot_after update

Device Manager
now we can see lsi controller [ LSI Adapter, SAS 3000 series, 8-port with 1068E ]

7.0_Serial_6D800_update fail_but different_after reboot_裝置管理員_SAS 3000_series -port with 1068E

check in MegaRAID Storage Manager.

9_MegaRAID Storage Manager_Physical_after update_reboot_mosaic
seems ok.

I  attach two 320GB sata disks (old ones, seagate 7200.10)
Dell SAS1068E_1

wow, two seperate disks.

y_Disk info_Device manager

partion is ok.

y_Disk info_Device manager_2_seperate

HBA it mode, correctly.


8. try to build raid

z_Create Virtual Drivez_Create Virtual Drive_Raid 1z_Create Virtual Drive_Raid 1_1z_Create Virtual Drive_Raid 1_2_Finish

under device manager, this raid 1 disk will show [ LSILOGIC logicalVolume SCSI Disk Device ]

z_Create Virtual Drive_Raid 1_3_Device manager

finally, this card is HBA or Raid card?
Now……I don’t know, but it works perfectly.

#娜柴3C筆記

Of course, you can flash in dos or efi mode, see broadcom documents in zip file.

Author: Nathan Yung

發佈留言

Specify Instagram App ID and Instagram App Secret in Super Socializer > Social Login section in admin panel for Instagram Login to work

Close Menu
×
×

Cart